Here is some documentation about the process I used to solve some issues with hotfolder and the features module. I was doing this partly through the web interface and partly through a console, so this is a reconstruction of what I remember and the console log. 

 

I was getting the following error message when I tried to check hotfolder watches (see https://www.drupal.org/node/2453659):

Notice: Undefined property: stdClass::$field_watch_config_scheme

 

That error is related to the field not being properly configured by the features module. The way to fix this is to 'revert' the feature. That's a real pain to do unless you're using drush.

So... Log into a console on the server and change to the sites directory for your site. I use KiTTY.

First, let's update drush:
  > composer global update

 

Reverting a feature is done like this:
  > drush features-revert hotfolder -y

However, features won't detect any changes unless you clear its codecache variable first.

   > drush variable-delete features_semaphore

Now you can revert the feature.

   > drush features-revert hotfolder -y

 
Attempting to revert the feature resulted in this exception:

   exception 'FieldException' with message 'Cannot change an existing field's entity_types property.'

But that's not very helpful because it's too vague, so I changed the code to tell me more details (/modules/field/field.crud.inc, approx line 237):

  throw new FieldException("Cannot change an existing field's entity_types property.\n--- Field: ".$field['field_name'].$field['entity_types']);

 

The features settings on the web page (/admin/structure/features/hotfolder), showed it was stuck rebuilding the fields.
To make features try again to rebuild fields, delete this variable:

   > drush variable-delete features_semaphore

 

At some point, the module wouldn't install properly, and was giving me the field exception. (there is a lot of repeating commands, so remember that you can select a command from the console history using up-arrow.)

   > drush dre hotfolder -y      # disable, uninstall (remove) and re-enable the module

This was giving me exceptions, like 

   exception 'FieldException' with message 'Cannot change an existing field's entity_types property.
   --- Field: job_record_actions

The answer to that is

   > drush field-delete field_job_record_actions

... and then try to disable/uninstall/reenable again, which most of the time resulted in a different field causing the exception. Keep repeating these steps until the module is installed without giving an exception.

Sometimes I got an exception like this:

  exception 'DatabaseSchemaObjectExistsException' with message 'Table field_data_field_job_record_retries already exists.'

The answer to that is to delete the table in the database. I don't know if there is a drush command for that. And then try the reinstall command, etc.


And then... finally... this should work and hopefully features will show hotfolder as enabled and not rebuildling anything:

  > drush features-revert hotfolder -y

 

So with the module installed properly and its features fixed, everything should work now.

 

Here's another handy drush command

  > drush cc all   # clear all caches

 

Tags

Converting version control repositories from Bazaar to Git (bzr to git)

Bazaar is great on Windows. Several years later, git's tools for Windows still.... (ahem) are lacking or too commercial. However, official development on it has ended and git is so much more popular now. So I think the time has come to convert all my beloved bzr repositories to git.

First we need note some prerequisites:

Adding a hardware clock to Raspberry Pi (DS3231)

The popular clock module is uses the DS1307 real time clock chip, which is not very precise. For just a few dollars more, you can get a module with a much more precise DS3231 RTC chip. The one I got was SunFounder's module from Amazon for $9 (free shipping for Prime). It plugs right onto the Raspberry Pi's 40 pin header and doesn't even interfere with the plastic case I have. I have a Model B, but this module should also work on Model A and Model B+. The instructions refer to DS1307, but the chips use the same I2C commands, so it also works for DS3231.

How to run a PiPresents show when you don't have a Raspberry Pi

PiPresents is some pretty cool software that will run a PowerPoint-like presentation. But with lots more flexibility. It was originally written for the Raspberry Pi.

However.... perhaps someone else has your Pi. Perhaps you don't even have one. It is possible to run a PiPresents show on  your good ol' desktop computer (Windows, Linux, or Mac). Here's how.